Bnc 588-OEM-250ps User Manual download pdf

588-OEM-250ps Board Level Connection Information

588-OEM-250ps Board Level Overview

The 588-OEM-250ps is a board level option based on the 588 series pulse generator. The

specifications, communications, and overall functionality of the OEM model are the same as

described for the Model 588. The unit is available with either 4 or 8 independent outputs

that can be used for synchronizing multiple events. The 588-OEM-250ps all communications will

take place through USB, Ethernet, or RS-232 as there is no display or keypad for

interactions. The guide for standard SCIP communications with the unit can be found

above in the 588 standard manual. As with the 588, the OEM version is capable of generating

multiple pulses for all applications; but additional setup is required before even basic

pulsing may begin.

Digital Control Board Connection Information

*Note: The Power Input and Power Switch Connector are required connections for the 8530

module to function.

Power Input Connector (J2 - DC In)

The recommended connector is Molex 4 pin female C-grid (Molex #50-57-9404) or

equivalent.

The recommended contacts are Molex female terminals with gold contacts (Molex #16-

02-0087) or equivalent.

Pin Number: Connection: Specification:

1 (denoted by arrow on connector) +5 Volts DC 5V±2%, 1.2 Amp nominal capability

2 Ground

3 Ground

4 +24 Volts DC 24V±6%, 0.8A nominal capability

*Note: For an additional cost a recommended power supply and cable can be supplied

Power Switch Connector (J4 Pwr_Enab)

The recommended connector is Molex 2 pin female C-grid (Molex #50-57-9402) or

equivalent.

The recommended contacts are Molex female terminals with gold contacts (Molex #16-

02-0087) or equivalent.

*Note: This is the power enable switch; Short the contacts to turn the unit on and open them to

power down. (This connector will come shorted)

BNC Model 588-OEM-250ps

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - BNC Model 588-OEM-250ps

588-OEM-250ps Board Level Connection Information 588-OEM-250ps Board Level Overview The 588-OEM-250ps is a board level option based on the 588 ser

Page 2 - ) or equivalent

Figure 16: Mounting Information for the 588-OEM-250ps 4 Channel Expansion Board

Page 3

External Clock Input (J6) The recommended connector is a male BNC Internal Clock Output (J15 and J16) The recommended connector for J16 is a

Page 4 - Mounting Information

RS-232 Communications Connector (J5 RS-232) The recommended connector is a male standard density D-Sub 9 pin connector Pin Number: Connection:

Page 5

Digital Output Board Connection Information Digital Control Board Input (J1 or J2) The Output Board must be connected to the Digital Control Boa

Page 6

4 Channel Model when Digital Board is connected to J1 on the Output Board Figure 11: Connection Information for the 588-OEM-250ps-4C

Page 7

4 Channel Model when Digital Board is connected to J2 on the Output Board Figure 12: Connection Information for the 588-OEM-250ps-4C

Page 8

8 Channel Model when Digital Board is connected to J1 on the Output Board Figure 13: Connection Information for the 588-OEM-250ps-8C

Page 9

8 Channel Model when Digital Board is connected to J1 on the Output Board Figure 14: Connection Information for the 588-OEM-250ps-8C

Page 10

Comments to this Manuals

No comments

Bnc 588-OEM-250ps User Manual

Browse online or download User Manual for Generators Bnc 588-OEM-250ps. BNC 588-OEM-250ps User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Generators Bnc 588-OEM-250ps