Bnc 1105 Universal Counter User Manual Page 132
- Page / 197
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
132
132132
132
Resolution
<resolution> should use a mantissa of 1.0 and be an even
power of 10
<resolution>
Ch3
Default Value which indicates 4 digits of resolution for the specified
<expected value>
Range 1E-7 Hz ~ 1E7 Hz (15 to 3 digits of resolution)
Resolution
<resolution> should use a mantissa of 1.0 and be an even
power of 10
<source list> Default (@1)
Range (@1|@2|@3)
:MEASure[:SCALar][:VOLTage]:FREQuency:RATio?
[<expected_value> [,<resolution>]][,(@1),(@2)|(@1),(@3)|(@2),(@1)|(@3),(@1)]
Sets the measurement arming to “digits” and measures the frequency ratio between two inputs.
The <expected value> and <resolution> parameters are used to configure the number of digits
of resolution arming setting.
<expected value>
default 1
Range
Ch1/Ch2, Ch1/Ch3
1E-10 to 1E11
Range
Ch2/Ch1, Ch3/Ch1
1E-11 to 1E10
Resolution
<expected value> should be within
10% of ratio for optimum arming
configuration
<resolution>
Default
Value which indicates 4 digits of
resolution for the specified <expected
value>
Range
Ch1/Ch2, Ch1/Ch3
1E-25 ~ 1E8
(15 to 3 digits of resolution)
Range
Ch2/Ch1, Ch3/Ch1
1E-26 ~ 1E7
(15 to 3 digits of resolution)
Resolution
<resolution> should use a mantissa of
1.0 and be an even power of 10
<source list>
Default (@1,@2)
Range (@1,@2)|(@1,@3)|(@2,@1)|(@3,@1)
:MEASure[:SCALar][:VOLTage]:MAXimum? [(@1)|(@2)]
Measures voltage maximum.
- MODEL 1105 1
- 400 MHz Universal Counter 1
- Table of Contents 2
- General Information 5
- 1.2 Warranty Information 6
- Limitation of warranty 7
- 1.3 Precaution of Operation 7
- 1.4 Upkeep of the MODEL 1105 8
- 1.5 Safety Information 8
- 1.6 Symbols and Terms 9
- 1.7 Inspection 10
- 1.8 Options and Accessories 11
- Overview 12
- 2.1.2 To Replace the Fuse 14
- 2.2.1 The Front Panel 18
- 2.2.2 The Rear Panel 20
- Making Measurements 22
- 3.3 Time Interval Measurement 24
- 3.4 Period Measurement 25
- 3.6 Pulse Width Measurement 28
- 3.7 Duty Cycle Measurement 29
- 3.8 Totalize Measurements 31
- 3.9 Phase Measurements 32
- Front Panel Operations 35
- 4.2 Key Functions 36
- Stop/Single) 37
- Auto Arming 38
- Digits Arming 40
- 4.4 Setting Scale and Offset 46
- is then 47
- 4.5 Limits Operations 48
- 4.6 Statistics Operations 50
- 4.8 Trigger Setting 52
- 4.10 Utility Operations 58
- :CALibration:SECurity:STATe 59
- <Boolean>,<NRf> 59
- 4.11 Display Tips 61
- 4.11.2 Get HELP on ANY KEY 62
- Technical Support 63
- Remote Interface Operations 65
- :AUTO<Boolean> 74
- :CONTinuous<Boolean> 74
- [:IMMediate] 74
- The [:SENSe] command 75
- The :TRACe Commands 76
- Commands SYSTEM-RELATED 78
- Manual Calibration Procedures 81
- (Including External ARM) 85
- Error Messages 88
- 7.2 Execution Errors 91
- 7.3 Device-Specific Errors 92
- 7.4 Query Errors 92
- 7.5 Counter-Specific Errors 93
- Appendix 94
- Internal vs. External Time 96
- Base Selection 96
- A.1 RMS Resolution 99
- C. General Specifications 101
- D.2 Command Reference 106
- The command :CALCulate2 109
- The Command :CONFigure 120
- The Commands :MEASure? 129
- The Command :SENSe 136
- The Commands :SYSTem 152
- The Commands :TRACe 156
- Example 4 Other Measurement 182
- Example 5 Scale & Offset 185
- Example 6 Limit Modes 189
- Example 7 Stats Modes 193
Related products and manuals for Measuring instruments Bnc 1105 Universal Counter
Measuring instruments Bnc 1621M User Manual
(27 pages)
(27 pages)
Measuring instruments Bnc 1703M User Manual
(14 pages)
(14 pages)
Philips SA4VBE04KF/37 manuels
Manuels d'utilisation et guides de l'utilisateur pour Vidéo Philips SA4VBE04KF/37.
Nous fournissons des manuels en pdf 3 Philips SA4VBE04KF/37 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comments to this Manuals