Bnc 588-OEM-1NS User Manual download pdf

Model 588-OEM-1ns

588-OEM-1NS Board Level Overview

The 588-OEM-1NS is a board level, digital pulse generator based on the 565 series

in terms of specifications, communications, and overall functionality. The unit

is available with 2, 4, or 8 independent outputs for synchronizing

multiple events. All communications take place through RS232, USB, or

GPIB as there is no keypad/display interface included. Like the 565, the

8510 is capable of generating multiple pulses and triggers for all

applications; although, additional setup is required before basic operation

may begin.

Mounting & Communications

•

Care should be taken in mounting the OEM board. As no mounting holes

are included, it is recommended that card guide mounts (or equivalent)

be used. Mechanical clearances can be seen below in Figure 1. Care

should be taken to ensure that no foreign conductive material makes

contact with either side of the OEM board to eliminate destructive

electrical shorting.

•

All communications take place through a RS232, USB, or GPIB interface

with the use of Standard Commands for Programmable Instruments

(SCPI) command structure. Reference the SCPI command section for

more information regarding the implementation of SCPI syntax allowing

for complete OEM board control.

NOTE: All Display commands should not be used when operating the OEM

as no display interface is included.

Required Connections

•

The 588-OEM-1ns must be supplied with +5VDC and +24VDC via connector J20.*

•

The power switch connector at J5 must have the pins shorted together for

power to be supplied to the board.

NOTE: This connector comes jumpered.

•

The 588-OEM-1ns channel outputs are individually labeled and can be seen below

in Figure 2.

•

All other specified connectors shown in Figure 2 can be used for the

implementation of additional features, but are not required during

basic setup and pulsing.

*A recommended +5VDC/+24VDC power supply may be included for an

additional cost.

1 2 3 4 5 6

Model 588-OEM-1ns 1

Summary of Contents

Page 1 - Model 588-OEM-1ns

1 Model 588-OEM-1ns 588-OEM-1NS Board Level OverviewThe 588-OEM-1NS is a board level, digital pulse generator based on the 565 series in terms of spe

Page 2

2Board Level Connection InformationPlease refer to the standard user’s manual for operation of the unit and how the connections work. • Molex 4 pin f

Page 3

3 • USB Type BUSB Connection (J21)Number Name1 USB Vbus +2 USB Data- 3 USB Data+4 USB Ground • Standard IEEE 488 24 pin connectorGPIB

Page 4

4• Molex 2 pin female C-grid (Molex #50-57-9402). Contacts, MolexExternal Trigger/Gate (J3) #16-02-0103. Number Name1 Trigger/Gate input signal

Page 5

5 Figure 1 – 8510 Mechanical Interface

Page 6

6Figure 2 – Component/Connector layout

Comments to this Manuals

No comments

Bnc 588-OEM-1NS User Manual

Browse online or download User Manual for Generators Bnc 588-OEM-1NS. BNC 588-OEM-1NS User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Generators Bnc 588-OEM-1NS