Bnc 645 User Manual download pdf (Page 162)

162

Errors are cleared once you read them.

If more than 20 errors are detected, “too many Errors” show up in the last place

of the error queue. Unless user read the errors in the queue, the additional

errors will not be stored. If there is no error in the error queue when you read it,

“No error” string will be displayed.

SYSTem:BEEPer

Issue a single beeping tone.

SYSTem:BEEPer:STATe {OFF|ON}

Disable or enable the beeper.

SYSTem:BEEPer:STATe?

Query the beeper state. Return “0” (OFF) or “1” (ON).

SYSTem:COMMunicate:RLSTate {LOCal︱REMote︱RWLock}

Set the remote/local state of the waveform generator over the LAN interface

from a Telnet or socket session. Provides control analogous to the IEEE-488.2

commands such as GTL (Go To Local) over the GPIB and USB interfaces. The

default is Local which sets the instrument state to local and removes any

annunciator and locks the front-panel keyboard. The Remote parameter sets the

instrument state to remote, display the annunciators and locks the keyboard.

The RWLock parameter sets the instrument state to remote with lock and

display the rwl annunciator and locks the keyboard.

SYSTem:VERSion?

Query the waveform generator’s current SCPI version. A string in the form of

“YYYY.V” will be returned. “YYYY” represents the year of the version and “V”

represents the version number.

SYSTem:KLOCk[:STATe] {OFF︱ON}

Disable or enable the front panel keyboard lock. The default is OFF(meaning the

lock is off). When the lock is on, the front panel keyboard is locked. You can

exclude “local” key when locking the front panel keyboard by using

SYST:KLOC:EXCL LOC before you lock the keyboard.

SYSTem:KLOCk:EXCLude {NONE︱LOCal}

Specify if locking the front panel keyboard including the “local” key or excluding

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 189 190

No comments

Bnc 645 User Manual Page 162