Bnc 645 User Manual download pdf (Page 84)

under Cancel to withdraw the changes.

Press the DONE softkey to return to the LAN submenu.

DNS Setup Submenu

9. Press the softkey under DNS Setup to enter the submenu.

10.

Host Name

Press the softkey under Host Name to set the host name for

your waveform generator.

Use the numeric keys and the knob with the arrow keys to

enter your desired letters or symbols.

11.

Domain Name

Press the softkey under Domain Name.

Use the numeric keys and the knob with the arrow keys to

enter your desired letters or symbols.

12.

DNS Server

Press the softkey under DNS Serv.

Use the numeric keys to enter the IP address of the DNS

server.

Press the softkey under Enter to finish the entry or the softkey

under Cancel to withdraw the changes.

13.

Press the DONE softkey to return to the LAN submenu.

View Current Configuration

14. Press the softkey under Current Conf to display the current LAN

configuration.

6.2 Remote Interface Commands

You may instruct your Model 645 waveform generator to output

waveforms using the SCPI (Standard Commands for Programmable

Instrument) commands after the selected remote interface is

appropriately set up. This section lists the SCPI commands available for

remotely controlling the waveform generator. For first time SCPI users,

refer to Appendix B for the introductory materials on SCPI commands.

Note that the following conventions are used in SCPI command syntax.

The triangle brackets, <>, indicate that you must specify a value for the

enclosed parameter. The square brackets, [], indicate that the

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 189 190

No comments

Bnc 645 User Manual Page 84