Bnc 645 User Manual download pdf (Page 30)

Output button becomes lit when output is enabled.

Remote Interface Operation

OUTPut {OFF|ON}

Notes

• The Output is automatically disabled when an excessive external

voltage is applied to the Output connector on the front panel and

an error will be generated and the error message will be shown.

Remove the overload from the Output connector and enable the

Output again.

3.12 To Enabled/Disable Sync Out Signal

All the standard output functions, except dc and noise, can be associated

with a sync-out signal. It is outputted at the Sync connector on the front

panel.

Front-panel Operation

• To enable/disable the sync out signal, press the Utility button, and

then the Sync softkey to toggle the setting.

Figure 3-12

Figure 3-13

Remote Interface Operation

OUTPut:SYNC {OFF|ON}

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 189 190

No comments

Bnc 645 User Manual Page 30