Bnc 645 User Manual download pdf (Page 75)

for storing a user-defined instrument state. The location “0” can only be

accessed from the remote interface. Although you may store an

instrument state in it, it is always preserved for power-down state.

Anything previously stored in it will be overwritten with the power-down

state when the waveform generator is turned off.

Although you may assign a custom name to any of these locations from

the remote interface, you cannot assign a name for location “0” from the

front panel. The name can contains up to 12 characters, but the first

character has to be a letter and the rest of them can be numbers, letters

or the underscore character (“_”).

How to store/recall the instrument state

1. Press the Store/Recall button to enter the instrument state

submenu.

Figure 4-19

To store an instrument state, press the softkey under Store State

to enter the store-state submenu:

Press the softkey under your desired location number to

choose the location (only 1 to 4 are available from front

panel operation).

You may specify a name for the selected memory location.

Use the numeric keypad and the knob with the cursor keys

for entry.

Press the Store State softkey to store the present setting in

the memory or the Cancel softkey to cancel.

Figure 4-20

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 189 190

No comments

Bnc 645 User Manual Page 75